HP Z800 HP Z800 Workstation Maintenance and Service Guide - Page 118

Hard disk drive This workstation accommodates both SAS and SATA hard drives. Both 3.5 in. standard hard disk drives or 2.5 in. small form factor (SFF) hard disk drives may be installed in the workstation. NOTE: A 2.5 in. hard drive must be mounted in a 3.5 in. adapter before it can be installed in the chassis blind-mate carrier. Hard disk drives can be installed in the hard drive bay and the optical drive bay. Drives should be installed in the hard drive bay first, then in the optical drive bay. Installation in the optical drive bay requires an optional adapter kit. The hard drives blind-mate (direct-connect) to chassis mounted connectors, so manual cable connections may be avoided. This section includes these topics: Topic Removing a hard disk drive from the hard drive bay on page 107 Installing a hard disk drive in the hard drive bay on page 108 Removing a hard disk drive from the slot load optical bay on page 112 Installing a hard disk drive in the slot load optical bay on page 116 Removing a hard disk drive from the optical drive bay on page 120 Installing a hard disk drive in the optical drive bay on page 122 Installing dual SFF hard drives in the optical drive bay on page 124 106 Chapter 5 Replacing components ENWW