HP Z800 HP Z800 Workstation Maintenance and Service Guide - Page 153
Removing a DIMM, Carefully push outward on the memory slot socket levers
UPC - 884962082454
View all HP Z800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Removing a DIMM 1. Disconnect power from the workstation (see Predisassembly procedures on page 74). CAUTION: To ensure that DIMMs are not damaged during removal or installation, power off the workstation and unplug the power cord from the AC power outlet. If you do not unplug the power cord before installing memory, the modules might be damaged and the workstation will not recognize the memory changes. 2. Remove the side access panel (see Removing the side access panel on page 76). 3. Remove the airflow guide (Removing the airflow guide on page 77). 4. Remove the memory fans (see Removing the memory fans on page 137). 5. Carefully push outward on the memory slot socket levers . Lift the DIMM straight up and out of its socket 2 as shown in the following figure. Store the DIMM in an anti-static bag. Figure 5-88 Removing a DIMM ENWW Removing and installing components 141