HP Z800 HP Z800 Workstation Maintenance and Service Guide - Page 235
and No Keyboard Attached, Network Server Mode Active
UPC - 884962082454
View all HP Z800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
Table 6-10 POST error messages (continued) Screen message Probable cause ERROR: Mixing processors with different power requirements. This is not supported. System halted. Mixed type processors detected. Invalid electronic serial number Incorrect serial number registered in the system. Mixing processors with different power requirements. This is not supported. System halted. Mixed type processors detected. Mixing Two Different Mixed type processors detected. Processor Types MP and DP!!! Network Server Mode Active Keyboard not detected. and No Keyboard Attached Processor initialization fails!!! Processor defective. The installed CPUs have different voltage requirements. This is not supported. System halted. Mixed type processors detected. Two processors do not have Mixed type processors detected. the same frequency operating ranges!!! Recommended action Replace the processors with matched processors. Use the Computer Setup (F10) Utility to reset the serial number. Replace the processors with matched processors. Replace the processors with matched processors. Verify that a functioning keyboard is attached to the workstation. Replace the processor. Replace processors with matched processors. Replace processors with matched processors. ENWW Diagnostic codes and errors 223