HP ZBook 17 Maintenance and Service Guide - Page 101

from the connector securing it to the display enclosure., Disconnect display cable

Page 101 highlights

a. Lift and remove the WWAN antennas (1) off the display enclosure. b. Remove the antenna cables (2) from the routing path of the display enclosure. c. Remove the WWAN antennas (3) from the bottom of the display enclosure. The antennas are available using spare part number 848347-001. 11. If it is necessary to replace the display cable: a. Disconnect the end of the display cable (1) from the connector securing it to the display enclosure. b. Disconnect display cable (2) from the small connector securing it to the display enclosure. c. Release the cable (3) from the routing path along the display enclosure. d. Remove the cable (4). The display cable is available using spare part number 848379-001. Component replacement procedures 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

a.
Lift and remove the WWAN antennas
(1)
off
the display enclosure.
b.
Remove the antenna cables
(2)
from the routing path of the display enclosure.
c.
Remove the WWAN antennas
(3)
from the bottom of the display enclosure.
The antennas are available using spare part number 848347-001.
11.
If it is necessary to replace the display cable:
a.
Disconnect the end of the display cable
(1)
from the connector securing it to the display enclosure.
b.
Disconnect display cable
(2)
from the small connector securing it to the display enclosure.
c.
Release the cable
(3)
from the routing path along the display enclosure.
d.
Remove the cable
(4)
.
The display cable is available using spare part number 848379-001.
Component replacement procedures
87