HP ZBook 17 Maintenance and Service Guide - Page 95
Display assembly, Remove the display assembly
View all HP ZBook 17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Display assembly NOTE: The Dream Color display assembly is spared as a whole unit assembly only. The LED display assembly is spared at the subcomponent level only. For more LED display assembly spare part information, see the individual removal subsections. Description Non-touch, 17.3 in, UHD, UWVA, Dream Color 3 display assembly not equipped with a webcam Non-touch, 17.3 in, UHD, UWVA, Dream Color 3 display assembly equipped with a webcam Touch screen, 17.3 in, FHD, UWVA, display assembly equipped with a webcam Spare part number 848393-001 848394-001 906395-001 To remove the display assembly and access the LED display assembly subcomponents, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service door (see Service door on page 36). 5. Disconnect the battery (see Battery on page 39). Remove the display assembly: 1. Remove the six Phillips screws (1) that secure each hinge to the computer. 2. Open the computer as far as possible. 3. Separate the display from the computer (2). 4. If it is necessary to replace the display bezel or any of the LED display assembly subcomponents: Component replacement procedures 81