HP c3700 hp Visualize b2000 UNIX workstation service handbook (a5983-90039) - Page 117
Step 2, Step 1
View all HP c3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Field Replaceable Units FRU Removal and Replacement 3. Load the DIMM cards in the memory slots using the loading sequence provided in Figure 4-43. Note that the B2000 system label located on the chassis floor also explains the loading sequence for DIMM cards. See Figure 4-44. Follow the steps in Figure 4-45 to install each DIMM card. NOTE When installing memory, you need to orient the notches on the bottom edge of the DIMM card so that they are aligned with the keys on the DIMM connector. See Figure 4-45. The keyed DIMM connectors prevent you from installing the DIMM cards backwards. Figure 4-44. B2000 System Label Front of the Workstation Memory Loading Sequence on B2000 System Label Figure 4-45. Installing a DIMM Card Step 1 Notches Step 2 Ejector Tab Press down on the ejector tabs to open them and place the DIMM card in the connector with your fingers on the edge of the DIMM card. Be sure the notches on the bottom edge of the DIMM card aligns with the keys on the DIMM connector. Push the DIMM card down firmly and evenly into the connector to be sure it is properly seated. Ejector Tab Chapter 4 117