HP c3700 hp Visualize b2000 UNIX workstation service handbook (a5983-90039) - Page 90
Power Switch/LCD Assembly
View all HP c3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Field Replaceable Units FRU Removal and Replacement Power Switch/LCD Assembly This section explains how to remove and replace the power switch/LCD assembly, which is located on the front panel of the B2000 workstation. Removing the Power Switch/LCD Assembly Perform the following steps to remove the power switch/LCD assembly: 1. Open the workstation's front panel as shown in the section "Opening the Front Panel." 2. Unplug the power switch/LCD assembly's connector as shown in Figure 4-4. Figure 4-4. Removing the Power Switch/LCD Assembly Power Switch/LCD Assembly Connector Right Side Mounting Clip Power Switch/LCD Assembly Left Side Mounting Clips 3. Press inward on the mounting clip located on the right side of the power switch/LCD assembly and pull the right side of the assembly outward in a clockwise motion. See Figure 4-4. This action releases the mounting clips on the left side of the power switch/LCD assembly. Replacing the Power Switch/LCD Assembly Perform the following steps to replace the power switch/LCD assembly: 1. Open the workstation's front panel as shown in the section "Opening the Front Panel." 2. Insert the mounting clips on the left side of the power switch/LCD assembly into the slots on the workstation chassis. See Figure 4-4. 3. Press inward on the mount clip located on the right side of the power switch/LCD assembly and insert this clip into the hole provided for it on the workstation chassis. 4. Plug in the power switch/LCD assembly's connector. 5. Close the workstation's front panel as shown in the section "Closing the Front Panel." 90 Chapter 4