HP dx2310 Service Reference Guide: HP Compaq dx2310 MT/dx2318 MT Business PCs, - Page 50
Drives, 7.1 Locating Drive Positions - compaq microtower
View all HP dx2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.7 Drives The computer supports up to four drives that may be installed in various configurations. This Section describes the procedure for replacing or upgrading the storage drives. A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive. Ä CAUTION: Make sure personal files on the hard drive are backed up to an external storage device before removing the hard drive. Failure to do so will result in data loss. After replacing the primary hard drive, you will need to run the Restore Plus! CD to load the Compaq factory-installed files. 6.7.1 Locating Drive Positions * Drive Positions * * These apply for selected models and countries only. 6-12 490778-001 Service Reference Guide