HP dx2310 Service Reference Guide: HP Compaq dx2310 MT/dx2318 MT Business PCs, - Page 56
System Fan, Remove the four screws that secure the fan to the chassis and remove the fan.
View all HP dx2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.9 System Fan 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel (Section 6.2, "Remove the computer access panel and front bezel (MT chassis)"). 3. Disconnect the cable that connects the system fan to the system board. 4. Remove the four screws that secure the fan to the chassis and remove the fan. To install the fan, reverse the removal procedures. 6-18 490778-001 Service Reference Guide
6–18
490778-001
Service Reference Guide
Removal and Replacement Procedures— Microtower (MT) Chassis
6.9 System Fan
1. Prepare the computer for disassembly (
Section 6.1, “Preparation for Disassembly”
).
2. Remove the access panel (
Section 6.2, “Remove the computer access panel and front bezel
(MT chassis)”
).
3. Disconnect the cable that connects the system fan to the system board.
4. Remove the four screws that secure the fan to the chassis and remove the fan.
To install the fan, reverse the removal procedures.