HP xp8000 HP xp8000 series digital projector - (English) Reference Guide - Page 51
Disconnecting, or unplug power. Disconnecting the power breaks the network connection.
View all HP xp8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Presentations Disconnecting Ä CAUTION: Do not disconnect power or turn off the projector until the projector has cooled down (the fan stops) and the power button light stops blinking. Otherwise, you might shorten the life of the lamp. 1. Press the power button on the projector or remote control to turn off the projector. The power button blinks during the two-minute cool-down period. Then, the projector enters Standby mode, which retains network connectivity. 2. You can disconnect video and audio equipment from the projector during the cool-down period but not the power cord. ✎ If the projector is connected to a network, do not turn off the main disconnect switch or unplug power. Disconnecting the power breaks the network connection. 3. If you must unplug or remove the projector, wait until the power button light stops blinking. Then turn off the main disconnect switch on the back of the projector and unplug the power cord. If you try to turn on the projector again during the cool-down period, it does not turn on. Wait until the cool-down period ends and the power button stops blinking. Reference Guide 51