HP xp8000 HP xp8000 series digital projector - (English) Reference Guide - Page 73
Picture problems, input > Source auto-search.
View all HP xp8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Troubleshooting Picture problems If the image is not displayed on the screen, but the HP startup screen is displayed: ❏ Press the source button on the projector or remote control. ❏ Turn off or disable the notebook or desktop computer screen saver function. ❏ For a computer connection, ensure your notebook computer's external video port is turned on. See the video port card shipped with the projector. On some notebooks, for example, press the Fn + F4 function keys to turn on the external video port. ❏ Verify that the right input source is connected. Open the on-screen menu and select input. Then set the correct input source where the equipment is connected. ❏ Verify that the input port is enabled for auto-searching. Open the on-screen menu and select setup > Enable sources. ❏ Verify that auto search is enabled. Open the on-screen menu and select input > Source auto-search. If the wrong input source is displayed: ❏ Press the source button on the projector or the remote control to select another active input source. ❏ Verify that the right input source is connected. Open the on-screen menu and select input. Then set the correct input source. ❏ Verify that the input port is enabled for auto-searching. Open the on-screen menu and select setup > Enable sources. ❏ Verify that auto search is enabled. Open the on-screen menu and select input > Source auto-search. If the image is out of focus: ❏ Ensure the lens cap is removed. ❏ While displaying the on-screen menu, adjust the focus ring. (The image size should not change; if it does, you are adjusting the zoom not the focus.) Reference Guide 73