Hikvision ERI-Q108-P8 User Manual - Page 100

Network Settings

Get Hikvision ERI-Q108-P8 PDF manuals and user guides View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 100 highlights

ERI-Q10x-Px NVR User Manual Chapter 9 Network Settings 9.1 Configuring General Settings Purpose: Network settings must be properly configured before you operate the NVR over a network. 1. Go to Menu > Configuration > Network > General. Figure 9-1 Network Settings 2. Configure the following settings: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU, and DNS Server. 3. If the DHCP server is available, you can click the DHCP checkbox to automatically obtain an IP address and other network settings from that server. The internal NIC IPv4 address should be configured for the cameras connecting to the PoE or built-in switch network interface of the NVR. The valid value range of MTU is 500 to 9676. 4. Click Apply. 9.2 Configuring Advanced Settings 9.2.1 Configuring Hik-Connect Purpose Hik-Connect enables the mobile phone app and the service platform page (www.hik-connect.com) to access and manage your connected NVR, providing convenient remote access to the surveillance system. UM ERI-Q10x-Px 030118NA 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA
99
Chapter 9 Network Settings
Configuring General Settings
9.1
Purpose:
Network settings must be properly configured before you operate the NVR over a network.
Go to
Menu
>
Configuration
>
Network
>
General
.
1.
Network Settings
Figure 9-1
Configure the following settings: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU, and DNS
2.
Server.
If the DHCP server is available, you can click the
DHCP
checkbox to automatically obtain an IP address and
3.
other network settings from that server.
The internal NIC IPv4 address should be configured for the cameras connecting to the PoE or built-in
switch network interface of the NVR.
The valid value range of MTU is 500 to 9676.
Click
Apply
.
4.
Configuring Advanced Settings
9.2
Configuring Hik-Connect
9.2.1
Purpose
Hik-Connect enables the mobile phone app and the service platform page (www.hik-connect.com) to access
and manage your connected NVR, providing convenient remote access to the surveillance system.