Hikvision ERI-Q108-P8 User Manual - Page 110

OPTION 2: Manual, Manual, Mapping Type, Apply, Refresh, Manual Mapping, Before You Start, Menu >

Get Hikvision ERI-Q108-P8 PDF manuals and user guides View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

ERI-Q10x-Px NVR User Manual • OPTION 2: Manual If you select Manual as the mapping type, you can edit the external port on your demand by clicking to activate the External Port Settings dialog box. 1. Select Manual in the Mapping Type drop-down list. 2. Click to activate the External Port Settings dialog box. Configure the external port no. for server port, http port, RTSP port, and https port respectively. You can use the default port no. or change it according to actual requirements. External Port indicates the port no. for port mapping in the router. The value of the RTSP port no. should be 554 or between 1024 and 65535, while the value of the other ports should be between 1 and 65535 and the values must differ from each other. If multiple devices are configured for the UPnP™ settings under the same router, the value of the port no. for each device should be unique. Figure 9-16 External Port Settings Dialog Box 3. Click Apply to save the settings. 4. Click Refresh to get the latest port mapping status. Figure 9-17 UPnP™ Settings Finished-Manual • Manual Mapping If your router does not support the UPnP™ function, perform the following steps to map the port manually. Before You Start: Make sure the router supports configuring the internal port and external port in the Forwarding interface. 1. Go to Menu > Configuration > Network. UM ERI-Q10x-Px 030118NA 109

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA
109
•
OPTION 2: Manual
If you select
Manual
as the mapping type, you can edit the external port on your demand by
clicking
to activate the External Port Settings dialog box.
1.
Select
Manual
in the
Mapping Type
drop-down list.
2.
Click
to activate the External Port Settings dialog box. Configure the external port no. for
server port, http port, RTSP port, and https port respectively.
You can use the default port no. or change it according to actual requirements.
External Port indicates the port no. for port mapping in the router.
The value of the RTSP port no. should be
554
or between 1024 and 65535, while the value of the
other ports should be between 1 and 65535 and the values must differ from each other. If multiple
devices are configured for the UPnP™ settings under the same router, the value of the port no. for
each device should be unique.
External Port Settings Dialog Box
Figure 9-16
3.
Click
Apply
to save the settings.
4.
Click
Refresh
to get the latest port mapping status.
UPnP™ Settings Finished-Manual
Figure 9-17
•
Manual Mapping
If your router does not support the UPnP
™
function, perform the following steps to map the port manually.
Before You Start:
Make sure the router supports configuring the internal port and external port in the Forwarding interface.
Go to
Menu > Configuration > Network
.
1.