Hikvision ERI-Q108-P8 User Manual - Page 107
Configuring E-Mail
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
ERI-Q10x-Px NVR User Manual • Server Port and HTTP Port: Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP Port is 80, and you can change them according to different requirements. The Server Port should be set to the range of 2000-65535 and it is used for remote client software access. The HTTP port is used for remote IE access. Figure 9-11 Configure More Settings 4. Click Apply to save and exit the interface. 9.2.5 Configuring E-Mail Purpose: The system can be configured to send an e-mail notification to all designated users if an alarm event is detected, etc., an alarm or motion event is detected or the administrator password is changed. Before configuring the e-mail settings, the NVR must be connected to a local area network (LAN) that maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail accounts to which you want to send notification. 1. Go to Menu > Configuration > Network. 2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, and Preferred DNS Server in Network Settings. Figure 9-12 Network Settings Interface UM ERI-Q10x-Px 030118NA 106