Hikvision ERI-Q108-P8 User Manual - Page 108
Configuring NAT
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
ERI-Q10x-Px NVR User Manual 3. Click Apply to save the settings. 4. Select the Email tab to enter the Email Settings interface. Figure 9-13 E-Mail Settings Interface 5. Configure the following e-mail settings: • Enable Server Authentication (optional): Check the checkbox to enable the server authentication feature. • User Name: The user account of sender's e-mail for SMTP server authentication • Password: The password of sender's e-mail for SMTP server authentication • SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com) • SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25. • Enable SSL/TLS (optional): Check the checkbox to enable SSL/TLS if required by the SMTP server. • Sender: The name of sender • Sender's Address: The e-mail address of sender • Select Receivers: Select the receiver. Up to three receivers can be configured. • Receiver: The name of user to be notified • Receiver's Address: The e-mail address of the user to be notified • Test: Send a test message to verify that the SMTP server can be reached. 6. Click Apply to save the e-mail settings. 7. Click Test to check your e-mail settings. The corresponding Attention message box will pop up. 9.2.6 Configuring NAT Purpose: Two ways are provided for port mapping to realize remote access via the cross-segment network, UPnP™ and manual mapping. UM ERI-Q10x-Px 030118NA 107