Hikvision ERI-Q108-P8 User Manual - Page 124
Enable Rotate, Clockwise 270 degrees, Mirror Mode, Left-Right, Up-Down, Center, Apply
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
ERI-Q10x-Px NVR User Manual Figure 11-4 Image Settings Interface 2. Select the camera for which to set image parameters. 3. Adjust the slider or click on the up/down arrow to set the brightness, contrast, or saturation value. 4. Set the Enable Rotate function to Clockwise 270 degrees or OFF. If OFF is selected, the image is restored to original. 5. Set the Mirror Mode to Left-Right, Up-Down, Center, or OFF. If OFF is selected, the image is restored to original. The Rotate and Mirror functions must be supported by the connected IP camera. The image parameters adjustment can affect both the live view and the recording quality. 6. Click Apply to save the settings. UM ERI-Q10x-Px 030118NA 123
ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA
123
Image Settings Interface
Figure 11-4
Select the camera for which to set image parameters.
2.
Adjust the slider or click on the up/down arrow to set the brightness, contrast, or saturation value.
3.
Set the
Enable Rotate
function to
Clockwise 270 degrees
or
OFF
. If
OFF
is selected, the image is restored
4.
to original.
Set the
Mirror Mode
to
Left-Right
,
Up-Down
,
Center
, or
OFF
. If
OFF
is selected, the image is restored to
5.
original.
The Rotate and Mirror functions must be supported by the connected IP camera.
The image parameters adjustment can affect both the live view and the recording quality.
Click
Apply
to save the settings.
6.