Hikvision ERI-Q108-P8 User Manual - Page 120
Configuring HDD Error Alarms
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
ERI-Q10x-Px NVR User Manual Figure 10-9 Bad Sector Detection 4. Click Error info to see detailed damage information. 5. You can also pause/resume or cancel the detection as desired. 10.4 Configuring HDD Error Alarms Purpose: You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal. 1. Go to Menu > Configuration > Exceptions. 2. Set the Exception Type to HDD Error on the drop-down list. 3. Click the checkbox(s) to select the HDD error alarm type(s), as shown in Figure 10-10. The alarm type can be set to: Audible Warning, Notify Surveillance Center, Send Email, and Trigger Alarm Output. Refer to Chapter 8.8 Setting Alarm Response Actions. Figure 10-10 Configure HDD Error Alarm UM ERI-Q10x-Px 030118NA 119
ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA
119
Bad Sector Detection
Figure 10-9
Click
Error info
to see detailed damage information.
4.
You can also pause/resume or cancel the detection as desired.
5.
Configuring HDD Error Alarms
10.4
Purpose:
You can configure the HDD error alarms when the HDD status is
Uninitialized
or
Abnormal
.
Go to
Menu > Configuration > Exceptions
.
1.
Set the
Exception Type
to
HDD Error
on the drop-down list.
2.
Click the checkbox(s) to select the HDD error alarm type(s), as shown in Figure 10-10.
3.
The alarm type can be set to: Audible Warning, Notify Surveillance Center, Send Email, and Trigger
Alarm Output. Refer to
Chapter 8.8 Setting Alarm Response Actions
.
Configure HDD Error Alarm
Figure 10-10