Hikvision ERI-Q108-P8 User Manual - Page 87
Setting Sensor Alarms
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
ERI-Q10x-Px NVR User Manual 8.2 Setting Sensor Alarms Setting sensor alarms are possible only if using cameras with alarm inputs/outputs. Purpose: Set the handling action of an external sensor alarm. 1. Go to Menu > Configuration > Alarm. 2. Select the Alarm Input tab to enter the Alarm Input Settings interface. Figure 8-4 Alarm Status Interface of System Configuration 3. Set up the handling action of the selected alarm input. 1) Check Enable and click Setting to set up its alarm response actions. Figure 8-5 Alarm Input Setup Interface 4. (Optional) Enable the one-key disarming for local alarm input 1 (Local
ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA
86
Setting Sensor Alarms
8.2
Setting sensor alarms are possible only if using cameras with alarm inputs/outputs.
Purpose:
Set the handling action of an external sensor alarm.
Go to
Menu > Configuration > Alarm
.
1.
Select the Alarm Input tab to enter the Alarm Input Settings interface.
2.
Alarm Status Interface of System Configuration
Figure 8-4
Set up the handling action of the selected alarm input.
3.
1) Check
Enable
and click
Setting
to set up its alarm response actions.
Alarm Input Setup Interface
Figure 8-5
(Optional) Enable the one-key disarming for local alarm input 1 (Local <- 1).
4.
1) Check
Enable One-Key Disarming
.
2) Click
Settings
to enter the linkage action settings interface.