Hikvision ERI-Q108-P8 User Manual - Page 109

Before You Start, Menu > Configuration > Network, Mapping Type, Manual, OPTION 1: Auto, Apply

Get Hikvision ERI-Q108-P8 PDF manuals and user guides View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

ERI-Q10x-Px NVR User Manual • UPnP™ Universal Plug and Play (UPnP™) can permit the device to seamlessly discover the presence of other devices on the network and establish functional network services for data sharing, communications, etc. You can use the UPnP™ function to enable the fast connection of the device to the WAN via a router without port mapping. Before You Start: To enable the UPnP™ function of the device, you must enable the UPnP™ function of the router to which your device is connected. When the network working mode of the device is set as multi-address, the Default Route of the device should be in the same network segment as that of the LAN IP address of the router. 1. Go to Menu > Configuration > Network. 2. Select NAT to enter the port mapping interface. Figure 9-14 UPnP™ Settings Interface 3. Check checkbox to enable UPnP™. 4. Select the Mapping Type as Manual or Auto in the drop-down list. • OPTION 1: Auto If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router automatically. 1. Select Auto in the Mapping Type drop-down list. 2. Click Apply to save the settings. 3. You can click Refresh to get the latest port mapping status. Figure 9-15 UPnP™ Settings Finished-Auto UM ERI-Q10x-Px 030118NA 108

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA
108
•
UPnP
™
Universal Plug and Play (UPnP™) can permit the device to seamlessly discover the presence of other
devices on the network and establish functional network services for data sharing, communications, etc.
You can use the UPnP™ function to enable the fast connection of the device to the WAN via a router
without port mapping.
Before You Start:
To enable the UPnP™ function of the device, you must enable the UPnP™ function of the router to which
your device is connected. When the network working mode of the device is set as multi-address, the
Default Route of the device should be in the same network segment as that of the LAN IP address of the
router.
Go to
Menu > Configuration > Network
.
1.
Select
NAT
to enter the port mapping interface.
2.
UPnP™ Settings Interface
Figure 9-14
Check
checkbox to enable UPnP™.
3.
Select the
Mapping Type
as
Manual
or
Auto
in the drop-down list.
4.
•
OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the
router automatically.
1.
Select
Auto
in the
Mapping Type
drop-down list.
2.
Click
Apply
to save the settings.
3.
You can click
Refresh
to get the latest port mapping status.
UPnP™ Settings Finished-Auto
Figure 9-15