Hikvision ERI-Q108-P8 User Manual - Page 130
Restoring Default Settings
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
ERI-Q10x-Px NVR User Manual Figure 12-9 FTP Upgrade Interface 3. Enter the FTP Server Address in the text field. 4. Click Upgrade to start upgrading. 5. After the upgrading is complete, reboot the NVR to activate the new firmware. 12.5 Restoring Default Settings 1. Go to Menu > Maintenance > Default. Figure 12-10 Restore Defaults 2. Select the restore type from the following three options. • Restore Defaults: Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings. • Factory Defaults: Restore all parameters to the factory default settings. • Restore to Inactive: Restore the device to inactive status. 3. Click OK to restore the default settings. The device will reboot automatically after restoring to the default settings. UM ERI-Q10x-Px 030118NA 129