Hikvision ERI-Q108-P8 User Manual - Page 14
Getting Started
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ERI-Q10x-Px NVR User Manual Chapter 2 Getting Started 2.1 Device Startup and Activation 2.1.1 Starting Up and Shutting Down the NVR Purpose: Proper startup and shutdown procedures are crucial to expanding the life of the NVR. Before You Start: Check that the power supply voltage matches the NVR's requirement, and the ground connection is working properly. Starting Up the NVR 1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power indicator LED on the front panel should be green, indicating the device is on. 2. The row of icons at the bottom of the screen shows the HDD status. "X" means that the HDD is not installed or cannot be detected. Shutting Down the NVR 1. Go to Menu > Shutdown. 2. Click Shutdown. 3. Click Yes. Figure 2-1 Shutdown Menu Figure 2-2 Shutdown Attention UM ERI-Q10x-Px 030118NA 13