Hikvision ERI-Q108-P8 User Manual - Page 99
Triggering or Clearing Alarm Output Manually
View all Hikvision ERI-Q108-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
ERI-Q10x-Px NVR User Manual 5. Repeat the above steps to set up an arming schedule for other days of the week. You can also use the Copy button to copy an arming schedule to other days. 6. Click OK to complete the video tampering settings of the alarm output no. 7. You can also copy the above settings to another channel. Figure 8-22 Copy Settings of Alarm Output 8.9 Triggering or Clearing Alarm Output Manually Purpose: A sensor alarm can be triggered or cleared manually. If "Manually Clear" is selected in the dwell time drop-down list of an alarm output, the alarm can be cleared only by clicking the Clear button in the following interface. 1. Select the alarm output you want to trigger or clear and perform related operations. 2. Go to Menu > Manual > Alarm. 3. Click Trigger/Clear to trigger or clear an alarm output. 4. Click Trigger All to trigger all alarm outputs. 5. Click Clear All to clear all alarm outputs. Figure 8-23 Clear or Trigger Alarm Output Manually UM ERI-Q10x-Px 030118NA 98