IBM 17011RS Maintenance Manual - Page 40
Cache, memory, controller, battery, Diagnostics
![]() |
UPC - 000435304971
View all IBM 17011RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
+ SP1 SP2 FC1 FC0 connector connector Fibre Channel RAID controller SCSI Ch3 SCSI Ch4 LINK TX/RX Data Data System DIMM! Cache DIMM! MGMT ETH 0 Management connector LED 9 LED 10 LED 11 LED 12 Figure 16. Fibre Channel RAID controller LEDs and connectors Serial connectors (SP1 and SP2) The serial connectors are for diagnostic purposes only. Management connector The management connector is for ServeRAID Manager function. FC 1 connector The FC 1 connector is for Fibre Channel data transfer. FC 0 connector The FC 0 connector is for Fibre Channel data transfer. SCSI channel 4 SCSI channel 4 can be connected to an IBM EXP400 Storage Expansion Unit. SCSI channel 3 SCSI channel 3 can be connected to an IBM EXP400 Storage Expansion Unit. The Fibre Channel RAID controller has two status LEDs on each of the two Fiber Channel host connectors. Cache memory and RAID controller battery Each RAID controller contains 256 MB of cache memory. It also contains a sealed, rechargeable lithium ion battery that maintains data in the cache for up to three days in the event of a power failure. The service life of the battery is 36 months, after which time the battery should be replaced. For information about replacing the battery, see "Replacing the cache battery in the RAID controller" on page 43. Diagnostics To diagnose problems on the DS400 storage subsystem, use the following diagnostic tools: v ServeRAID Manager software v LEDs and the "Symptom-to-FRU index" on page 27 v Sansurfer Pro (see the DS300 and DS400 Problem Determination Guide) 26 IBM TotalStorage DS300 and DS400: Hardware Maintenance Manual
![](/manual_guide/products/ibm-17011rs-maintenance-manual-ccee445/40.png)