IBM 17011RS Maintenance Manual - Page 58
controller
UPC - 000435304971
View all IBM 17011RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
9. Remove the RAID controller that contains the battery that you want to replace: a. While squeezing together the latch and lever that are on each side of the controller, press down on the orange area on each latch. The controller will slide out of the bay a short distance. RAID controller RAID controller filler panel Figure 23. Removing a RAID controller b. Grasp both latches and pull the controller out of the bay. c. Place the controller on a dry, level surface. 10. Remove the cache battery from the controller: a. Loosen the thumbscrew that holds the battery in place. Battery Thumbscrew Figure 24. Removing the RAID controller battery b. Hold down the edge of the controller base on the battery side (near the thumbscrew). c. Pull up on the blue lift tab on the battery to remove it from the connector. d. Slide the battery toward the open end of the controller to remove it. e. Dispose of the used battery according to local and federal regulations, which might include hazardous material handling procedures. For more information, see "Battery return program" on page 59. 11. Unpack the replacement battery and set it on a dry, level surface. Save the packing material and documentation in case you have to return the battery. 12. Install the new cache battery into the RAID controller: a. Slide the battery under the tab near the front of the RAID controller. 44 IBM TotalStorage DS300 and DS400: Hardware Maintenance Manual