IBM 17011RS Maintenance Manual - Page 61
connectors
UPC - 000435304971
View all IBM 17011RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
RAID controller RAID controller filler panel Figure 26. Removing a RAID controller b. Grasp both latches and pull the controller out of the bay. c. Place the controller on a dry, level surface. Attention: To avoid breaking the retaining clips or damaging the DIMM connectors, open and close the clips gently. 9. Remove the DIMM from the RAID controller: a. Open the retaining clip on each end of the DIMM connector. Figure 27 shows the cache and system DIMMs. System DIMM Cache DIMM Figure 27. Cache and system DIMM locations b. Remove the DIMM. c. Touch the static-protective package that contains the new DIMM to any unpainted metal surface on the storage subsystem. Then, remove the DIMM from the package. d. Angle the DIMM so that the DIMM keys align correctly with the slot. Appendix A. Installing and replacing components 47