IBM 865263Y Handbook - Page 26
a. Place the tabs of the slide rail assembly front bracket
View all IBM 865263Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. Attach a nut bar to the front rack rail: a. Position a nut bar 1 behind the front rack rail 3 , in the U-unit for the server. b. Insert two screws (M6 by 16 mm) 2 through the holes in the rack rail and the nut bar. c. Tighten the screws until the nut bar is approximately 4 mm (.16 in.) from the rack rail. 4. Attach nut bars to the other three corners of the U-unit in the same way. 5. Attach the slide rail assemblies to each side of the rack. a. Place the tabs of the slide rail assembly front bracket 2 between the front rack rail 1 and the nut bar 3 . The bracket fits between the top and bottom screws. 16 Netfinity® 4000R User's Handbook
3. Attach a nut bar to the front rack rail:
a. Position a nut bar
±1²
behind the front rack rail
±3²
, in the U-unit for the
server.
b. Insert two screws (M6 by 16
mm)
±2²
through the holes in the rack rail and
the nut bar.
c. Tighten the screws until the nut bar is approximately 4 mm (.16 in.)
from
the rack rail.
4. Attach nut bars to the other three corners of the U-unit in the same way.
5. Attach the slide rail assemblies to each side of the rack.
a. Place the tabs of the slide rail assembly front bracket
±2²
between the front
rack rail
±1²
and the nut bar
±3²
.
The bracket fits
between
the top and
bottom screws.
16
Netfinity
4000R User's Handbook