IBM 865263Y Handbook - Page 30
Console adapter, Connect the other end of the power
View all IBM 865263Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Console adapter 1 Monitor connector 2 Keyboard connector 3 Mouse connector 4 Unused 5 Console cable connector 5. Connect the console adapter to a console selector switch. A console selector switch enables multiple servers to use the same console. Note: You might need to use an optional console cable set to reach the console selector switch. 6. Connect the keyboard, mouse, and monitor to the console selector switch. If you have more Netfinity 4000R servers than one console selector switch can accommodate, see the documentation that came with your switch for information about using multiple switches. 7. Connect all device cables and connectors to the server. 8. Connect the power cord to the server. Connect the other end of the power cord to a properly-grounded power distribution unit (PDU). See the ServerProven list at http://www.ibm.com/pc/compat to locate a PDU. 9. Connect the PDU power cable to a properly-grounded power outlet. 10. Turn on the PDU, the console selector switch, and the monitor. 11. Turn on the server by setting the power-on switch at the rear of the server to On. 20 Netfinity® 4000R User's Handbook