IBM 86605SU Maintenance Manual - Page 16
Power-on Self Test (POST), POST Beep Codes, Con s PCI adapters
UPC - 087944475767
View all IBM 86605SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Power-on Self Test (POST) When you turn on the server, it performs a series of tests to check the operation of server components and some of the options installed in the server. This series of tests is called the power-on self-test or POST. POST does the following: Checks the operation of some basic system-board operations Checks the memory Compares the current server configuration with the stored server configuration information Configures PCI adapters Starts the video operation Verifies that drives (such as the diskette, CD-ROM, and hard disk drives) are connected properly If you have a power-on password or administrator password set, you must type the password and press Enter, when prompted, before POST will continue. While the memory is being tested, the amount of available memory appears on the screen. These numbers advance as the server progresses through POST and the final number that appears on the screen represents the total amount of memory available. If POST finishes without detecting any problems, a single beep sounds, the first screen of your operating system or application program appears, and the System POST Complete (OK) light is illuminated on the information LED panel. If POST detects a problem, more than one beep sounds and an error message appears on your screen. Note: A single problem might cause several error messages. When this occurs, work to correct the cause of the first error message. After the cause of the first error message is corrected, the other error messages usually will not occur the next time you run the test. For a complete list of error codes, see "Symptom-to-FRU Index" on page 263. POST Beep Codes POST generates beep codes to indicate successful completion or the detection of a problem. One beep indicates the successful completion of POST. For a complete list of error codes, see "Symptom-to-FRU Index" on page 263. Netfinity 5500 - Type 8660 11