IBM 86605SU Maintenance Manual - Page 76

Select 3 Restart SP to restart the system management processor. Using Remote Video Mode to Monitor and Access POST: You can use a terminal program to remotely monitor all textual output generated during POST. All POST data will be displayed in the terminal program window as the remote system completes POST. While you are monitoring POST on the remote system, all local keystrokes are relayed automatically to the remote system, enabling you to use POST utilities (such as system configuration, RAID mini-configuration program, or diagnostic programs) that can be accessed during POST. To use Remote Video Mode to monitor and access POST on the server: 1. Use a terminal program to establish a connection with the system management processor modem. 2. Log in to the system management processor. When you have established a connection with the system management processor, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the system management processor. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password is case sensitive. You must use all caps, and the "0" in PASSW0RD, is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Important If you update the system management processor microcode, the default username (USERID) and password (PASSW0RD) are reset. If applicable, notify the system administrator. When you have logged into the system management processor, the following main menu appears: 2 Monitors 3 Error Logs 4 Service Processor Configuration 5 System Services 6 System Power 7 Boot B Remote Terminal Status Y Disconnect Current Logon Z Start Remote Video Netfinity 5500 - Type 8660 71