IBM 86605SU Maintenance Manual - Page 33

Alert Options Network Settings: If you want to monitor ServeRAID controllers across a network, you must switch to the client/server mode. You can use the Network Settings dialog box to select and connect to servers in your network that have an IBM ServeRAID controller installed. To select and connect to a server: 1. Click on the icon on the tool bar or select Network Settings from the Options pull-down menu. A screen similar to the following appears. Network Settings Stand-alone Connect Client/Server Cancel Client/Server Settings User Name: Password ServeRAID ******* TCP/IP Add Delete Host Name: Port Number (Optional) ips: 1087 2. Select the Client/Server radio button. 3. If security is enabled on the server to which you are connecting, type in your User Name and Password as defined by the security file on the server to which you are connecting. (See "Server Security File" on page 24 for information about the security file). 4. Type in either the Hostname or the TCP/IP Address of the system, or select them from the pull-down list. Note If your server was started on any port other than the default (1087), type in a colon and the correct port number for your configuration (for example: ServeRAID:1088) after the Hostname or TCP/IP Address that you just entered. 28 Netfinity Server HMM