IBM 86605SU Maintenance Manual - Page 35
Netfinity Alert Options, To con the settings for the Netfinity alerts, Alert Options.
![]() |
UPC - 087944475767
View all IBM 86605SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Synchronization started Synchronization completed Migration started Migration completed PFA event detected Dead drive detected ServeRAID controller not responding to commands Netfinity Alert Options: Netfinity alerts allow system administrators who are using the Netfinity Manager to configure the ServeRAID Administration and Monitoring utility program, to notify the Netfinity Alert Manager of various activities occurring on the server. To configure the settings for the Netfinity alerts: 1. Open the Options pull-down menu. 2. Click on Alert Options. 3. Click on Netfinity Alerts. A screen similar to the following appears. Netfinity Alerts Enable Netfinity Alerts Alert Information Messages Alert Warning Messages Alert Fatal Messages Send Test Alert Cancel OK 4. To enable all of the Netfinity alerts, click on the check box next to Enable Netfinity Alerts. 5. To disable any of the Netfinity alerts: a. Verify that there is a check in the check box next to Enable Netfinity Alerts. b. Click on the check box next to the specific alert or alerts that you want to disable. 6. To test the Netfinity alerts, click on the Send Test Alert button. This will send a Netfinity alert and test message to the Netfinity Alert Manager. If Netfinity alerts are enabled, the ServeRAID controller relays three types of messages to the Netfinity Alert Manager: Information messages - Rebuild started - Rebuild completed - Synchronization started 30 Netfinity Server HMM
![](/manual_guide/products/ibm-86605su-maintenance-manual-e887055/35.png)