IBM 86605SU Maintenance Manual - Page 237

Rack Installation Use the following information for installing a server in a rack and for removing a server from a rack. Your server comes with all the rack installation hardware (rack model only). Review the preinstallation information in "Before You Begin"; then, continue with "Installing and Removing the Server." 12 >50 kg (110 lbs) Caution Do not place any object weighing more than 50 kg (110 lbs) on top of the rack model of the server. Before You Begin You will need the following items: - An assortment of small screwdrivers - 8-inch adjustable wrench or pliers Some of the installation procedures require three people. To ensure rack stability, plan the installation of servers in the rack starting from the bottom. For more information, refer to the IBM Netfinity Rack Configurator program provided with ServerGuide. Review the documentation that comes with your rack enclosure for safety or cabling considerations. Ensure that your planned installation is within the rack's guidelines for heat generation, electrical requirements, air flow, and mechanical loading. Verify that the rack can meet the operating parameters, as detailed in "Specifications" on page 75. Installing and Removing the Server: During the installation procedure, you must install parts on the rack and the server. This process can be divided into two parts: Preparing the rack Installing the server in the rack 232 Netfinity Server HMM