IBM 86605SU Maintenance Manual - Page 160
Installing the Top Cover, If necessary, see Input/Output Connectors
![]() |
UPC - 087944475767
View all IBM 86605SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Installing the Top Cover: To install the server top cover: 1. Before installing a cover, check that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server. 2. Lower the cover 2 with the rear edge of the cover about 25 mm (1 inch) back from the rear edge of the server. 3. Slide the cover forward. 4. Tighten the two thumbscrews 1 on the back edge of the cover. 5. If you disconnected any cables from the back of the server, reconnect the cables; then, plug the power cords into properly grounded electrical outlets. Notes 1. If you are in the United Kingdom and have a modem or fax machine attached to your server, reconnect the telephone line after you plug in the power cords. 2. If necessary, see "Input/Output Connectors and Expansion Slots" on page 194 for connector locations. Netfinity 5500 - Type 8660 155
![](/manual_guide/products/ibm-86605su-maintenance-manual-e887055/160.png)