IBM 86605SU Maintenance Manual - Page 49
When you rebuild to a RDY drive, the DDD drive is, removed from the array and the state of the DDD
UPC - 087944475767
View all IBM 86605SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Rebuild Physical Drive Select OK to make the drive in channel 1 bay 5 the destination of the rebuild, or select another drive for the destination of the build Cancel OK 3. Select a RDY drive on which to store the reconstructed data, or click on OK to use the same bay if you have physically replaced the drive. Note The replacement hard disk drive must be the same size or larger than the failed drive. 4. The rebuild process begins and reports progress information on the screen. Adapter 1 Rebuild Progress Log Drv 0 53% Log Drv 1 Log Drv 2 Log Drv 3 Log Drv 4 Log Drv 5 Log Drv 6 Log Drv 7 Notes: 1. Only one Rebuild operation can take place at a time. 2. The Rebuild operation changes the hard disk drive state from DDD to RBL if the array contains a CRT logical drive. After the Rebuild operation completes, the hard disk drive state changes from RBL to ONL. (When you rebuild to a RDY drive, the DDD drive is removed from the array and the state of the DDD drive is changed to defunct hot-spare (DHS).) 3. If multiple hot-spare (HSP) drives are available, the ServeRAID controller searches all the bays on each channel for a hot-spare drive of the appropriate size and the first appropriate hot-spare drive found enters the Rebuild (RBL) state. 4. If a hot-spare (HSP) drive is available, a Rebuild operation starts automatically. 44 Netfinity Server HMM