IBM 86605SU Maintenance Manual - Page 292
Processor Board Verify that the J10 and, System Board With pins 2 and 3 of J32
UPC - 087944475767
View all IBM 86605SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Note Minimum operating requirements are: Power Supply Power Backplane Power AC Inlet Box System Board (With pins 2 and 3 of J32 connected together to bypass the power switch (button). The default is pins 1 and 2.) Processor Board (Verify that the J10 and J17 connectors are are installed correctly.) Memory-Module Kits (Minimum requirement = 1 bank of 64 MB DIMMs) 4. Power-on the computer. If the problem remains, suspect the following FRUs in the order listed: Power Supply Power Backplane System Board Processor Board Note If the problem goes away when you remove an adapter from the system, and replacing that adapter does not correct the problem, suspect the system board then the processor board(s) Netfinity 5500 - Type 8660 287
Note
Minimum operating requirements are:
Power Supply
Power Backplane
Power AC Inlet Box
System Board (With pins 2 and 3 of J32
connected together to bypass the power
switch (button).
The default is pins 1 and
2.)
Processor Board (Verify that the J10 and
J17 connectors are are installed correctly.)
Memory-Module Kits (Minimum requirement
= 1 bank of 64 MB DIMMs)
4.
Power-on the computer.
If the problem remains,
suspect the following FRUs in the order listed:
±
Power Supply
±
Power Backplane
±
System Board
±
Processor Board
Note
If the problem goes away when you remove an
adapter from the system, and replacing that adapter
does not correct the problem, suspect the system
board then the processor board(s)
Netfinity 5500 - Type 8660
287