Insignia NS-F20TR User Manual (English) - Page 22
Playing a disc
View all Insignia NS-F20TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo Notes: If you cannot play a disc with one of these logos, one of the following may be the cause. 1 Your TV combo conforms to the NTSC color system. Your TV combo cannot play discs recorded in other color systems such as PAL. 2 Some video DVDs do not work as described in this guide because of the limitations set by disc's producers. 3 You cannot playback discs recorded in the VR (Video Recording) format. 4 You may not be able to play scratched or stained discs. 5 You may not be able to play some discs because of incompatible recording conditions, characteristics of the recorder, or special properties of discs. 6 You can play discs which bear the marks above. If you use non-standardized discs, your TV combo may not play them or the sound or video quality may be compromised. 7 You may be able to play back the unfinalized DVD-R/RW disc recorded in the video format. However, depending on the recording status of a disc, the disc may not play or the picture or sound may be distorted. In this case, you need to finalize the disc with the DVD recorder. Refer to the guide that came with the DVD recorder. 8 You can only play discs that have been recorded in the video format and finalized. You cannot play unfinalized discs. Depending on the recording status of a disc, the disc may not play or the picture or sound may be distorted. 9 If there is too much recording space left on a disc (the used portion is less than 55 mm across), the disc may not play back correctly. 10 Do not glue paper or put stickers on to the disc. These may damage the disc and your TV combo may not read the disc correctly. 11 The region code for your TV combo is 1. You can play DVDs with region code 1 or ALL. You cannot play DVDs with other region codes. Unplayable discs Do not try to play any of the following discs, or you may damage your TV combo: • DVD-RAM • CD-i • Photo CD • DVD-Audio • DVD with a region code other than 1 or ALL • DTS-CD • Video CD • CD-R/RW with MP3 files • DVD-ROM for personal computers • CD-ROM for personal computers • Any other discs without compatibility indications Your TV combo can only play the sound recorded on the normal CD layer. Your TV combo cannot play the sound recorded on the high density Super Audio CD layer. Playing a disc To play a disc: 1 Press the POWER button to turn on your TV combo. 2 Press the OPEN/CLOSE button on the front panel to open the disc tray, then insert a disc with the label side up. 3 Press the PLAY or the OPEN/CLOSE button. The disc tray closes automatically and playback starts. Note With DVDs that use titles for playback program signals, playback may start from the second title or may skip these titles. 4 To control playback: • To freeze the picture, press the PAUSE•SLOW button. Sound is muted when you freeze the picture. Press the PLAY button to resume playback. • To temporarily stop playback, press the STOP button once. • Press the PLAY button to resume playback where you stopped. • If you turn off your TV combo after pressing the STOP button once, your TV combo remembers where you stopped and resumes playing at that point where you stopped. • To completely stop playback, press the STOP button twice. If you press the PLAY button, playback starts at the beginning of the disc. • To fast-reverse or fast-forward the disc, press the SKIP/REW or FWD/SKIP button. Each time you press one of these buttons, the reverse or forward speed increases. For DVDs, the fast-reverse and fast-forward speed varies depending on the DVD. Approximate speeds are 1 (×2), 2 (×8), 3 (×20), 4 (×50), and 5 (×100). For Audio CDs, the approximate speeds are 1 (×2), 2 (×8), and 3 (×30). Press the PLAY button to resume normal playback. • To slow-reverse or slow-forward a DVD, press the PAUSE•SLOW button, then press and hold the SKIP/REW or FWD/SKIP button. Each time you press and hold one of these buttons, the reverse or forward speed decreases. Approximate speeds are 1 (1/16), 2 (1/8), and 3 (1/2). Note If a circle with a line through it appears in the top right corner of the screen when you try to use a feature, that feature is not available at the time. 22 www.insignia-products.com