Intel S5520SC Service Guide - Page 12

Workstation Board Features Feature Add-in card slots Video Support Hard drive and optical drive support USB drive support I/O control support RAID Support Security Management support Description ƒ Two PCI Express* Gen 2 x16 slots ƒ One PCI Express* Gen 1 slot (x4 mechanically, x1 electrically) ƒ One PCI Express* Gen 1 slot (x8 mechanically, x4 electrically) shared with SAS Module Slot. This PCI Express* Gen 1 slot is not available when the SAS module slot is in use and vice versa ƒ One 32-bit/33MHz PCI slot, keying for 5-V and universal PCI add-in card ƒ ServerEngines* LLC Pilot II* with 64 MB DDR2 memory, 8 MB allocated to graphics ƒ Dual video is supported ƒ On-board video available with optional accessory cable (FXXSCVDCBL) ƒ Supports optical devices ƒ Six SATA connectors at 1.5 Gbps and 3 Gbps ƒ Four SAS connectors at 3 Gbps through optional Intel® SAS Entry RAID Module AXX4SASMOD ƒ One internal USB port ƒ One internal low-profile USB port for Solid State Drive ƒ External connections: o RJ-45 serial port A connection o One 7.1 channel Audio connector o One 1394 connector for IEEE1394a support o One DH 10 serial port connector (optional) o Two RJ-45 NIC connectors for 10/100/1000 Mb connections: Dual GbE through the Intel® 82575EB Network Connection, with Intel® I/O Acceleration Technology 2 support o Four USB 2.0 ports at the back of the board ƒ Internal connections: o Two 9-pin USB headers, each supports two USB 2.0 ports o One internal USB port that supports a peripheral, such as a floppy drive o One DH10 serial port B header o Six SATA connectors at 1.5 Gbps and 3 Gbps o Four SAS connectors at 3 Gbps (optional) o One SSI-compliant 24-pin front control panel header o One 3-pin S/PDIF header o One 2x5-pin audio connector o One 2x5-pin IEEE 1394a connector ƒ Intel® Embedded Server RAID Technology II through on-board SATA connectors provides SATA RAID 0, 1, and 10 with optional RAID 5 support provided by the Intel® RAID Activation Key AXXRAKSW5 ƒ Intel® Embedded Server RAID Technology II through optional Intel® SAS Entry RAID Module AXX4SASMOD provides SAS RAID 0, 1, and 10 with optional RAID 5 support provided by the Intel® RAID Activation Key AXXRAKSW5 ƒ IT/IR RAID through optional Intel® SAS Entry RAID Module AXX4SASMOD provides entry hardware RAID 0, 1, 10/10E, and native SAS pass through mode ƒ Four ports with fully featured SAS/SATA hardware RAID through optional Intel® Integrated RAID Module SROMBSASMR (AXXROMBSASMR), provides RAID 0, 1, 5, 6, and striping capability for spans 10, 50, 60. ƒ Trusted Platform Module ƒ Integrated IPMI 2.0 compliant Baseboard Management Controller. 2 Intel® Workstation Board S5520SC Service Guide