Intel S5520SC Service Guide - Page 24

Graphics Card Population, Optional Hardware - chassis

Page 24 highlights

Workstation Board Features Graphics Card Population Graphics Card Support Intel® Server Chassis SC5600BASE One graphics card with maximum 150-W power in PCI Express* slot 6 Intel® Server Chassis SC5650WS One graphics card with maximum 300-W power in PCI Express* slot 6, or up to two graphics cards with maximum 150-W power in PCI Express* slot 4 and slot 6. Keep PCI Express* Slot 3 empty for optimal air flow when populating a graphics card in PCI Express* slot 4. Note: Please follow the installation guide accompanying your graphics card for the power connection. Graphics cards with power greater than 75 W must be self-cooled with exhaust out the back of the chassis. Table 5. Graphics Card Population Optional Hardware Intel® SAS Entry RAID Module AXX4SASMOD The Intel® Workstation Board S5520SC provides a SAS module slot (J2J1) for the installation of an optional Intel® SAS Entry RAID Module AXX4SASMOD. Once the optional Intel® SAS Entry RAID Module AXX4SASMOD is present, the x4 PCI Express* links from the ICH10R to PCI Express* Slot 2 (x8 mechanically, x4 electrically) will switch to the SAS module slot. The optional Intel® SAS Entry RAID Module AXX4SASMOD includes a SAS1064e controller that supports x4 PCI Express* link widths and is a single-function PCI Express* end-point device. The SAS controller supports the SAS protocol as described in the Serial Attached SCSI Standard, version 1.0, and also supports SAS 1.1 features. A 32-bit external memory bus off the SAS1064e controller provides an interface for Flash ROM and NVSRAM (Non-volatile Static Random Access Memory) devices. The optional Intel® SAS Entry RAID Module AXX4SASMOD provides four SAS connectors that support up to four hard drives with a non-expander backplane or up to eight hard drives with an expander backplane. The optional Intel® SAS Entry RAID Module AXX4SASMOD also provides a SGPIO (Serial General Purpose Input/Output) connector and a SCSI Enclosure Services (SES) connector for backplane drive LED control. 14 Intel® Workstation Board S5520SC Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

Workstation Board Features
14
Intel® Workstation Board S5520SC Service Guide
Graphics Card Population
Graphics Card Support
Intel
®
Server
Chassis
SC5600BASE
One graphics card with maximum 150-W power in PCI Express* slot 6
Intel
®
Server
Chassis SC5650WS
One graphics card with maximum 300-W power in PCI Express* slot 6, or up to two graphics
cards with maximum 150-W power in PCI Express* slot 4 and slot 6.
Keep PCI Express* Slot 3 empty for optimal air flow when populating a graphics card in PCI
Express* slot 4.
Note:
Please follow the installation guide accompanying your graphics card for the power connection.
Graphics cards with power greater than 75 W must be self-cooled with exhaust out the back of the chassis.
Table 5. Graphics Card Population
Optional Hardware
Intel
®
SAS Entry RAID Module AXX4SASMOD
The Intel
®
Workstation Board S5520SC provides a SAS module slot (J2J1) for the installation of an optional
Intel
®
SAS Entry RAID Module AXX4SASMOD. Once the optional Intel
®
SAS Entry RAID Module
AXX4SASMOD is present, the x4 PCI Express* links from the ICH10R to PCI Express* Slot 2 (x8 mechanically,
x4 electrically) will switch to the SAS module slot.
The optional Intel
®
SAS Entry RAID Module AXX4SASMOD includes a SAS1064e controller that supports x4
PCI Express* link widths and is a single-function PCI Express* end-point device. The SAS controller supports
the SAS protocol as described in the Serial Attached SCSI Standard, version 1.0, and also supports SAS 1.1
features. A 32-bit external memory bus off the SAS1064e controller provides an interface for Flash ROM and
NVSRAM (Non-volatile Static Random Access Memory) devices.
The optional Intel
®
SAS Entry RAID Module AXX4SASMOD provides four SAS connectors that support up to
four hard drives with a non-expander backplane or up to eight hard drives with an expander backplane.
The optional Intel
®
SAS Entry RAID Module AXX4SASMOD also provides a SGPIO (Serial General Purpose
Input/Output) connector and a SCSI Enclosure Services (SES) connector for backplane drive LED control.