Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 100
About Screen Blanking, Install the Hardware for Screen Blanking, Before You Install the Switch
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Chapter 7 - Enable Screen Blanking About Screen Blanking The CV41 supports screen blanking. When motion is detected, a screen blanking box or switch turns off the computer screen to avoid uneccessary driver distractions. Once the vehicle is stationary, the screen turns back on. To enable screen blanking on your computer, you must purchase one of the following: • Screen blanking box • Switch Intermec recommends that you use the screen blanking box to enable screen blanking on the CV41. If your vehicle lacks an electrical signal that detects vehicle motion, use a switch to enable screen blanking. You can install the switch in a variety of ways, but Intermec recommends you install a switch that closes when the user presses the accelerator pedal on a vehicle. Intermec does not sell a switch for screen blanking, but you can purchase a screen blanking box from Intermec. For more information, contact your local Intermec representative. Install the Hardware for Screen Blanking This section explains how to install theswitch to enable screen blanking on your computer. To install the screen blanking box, see the instructions that came with the screen blanking box. Installation of the screen blanking box or switch should be done by trained service personnel only. Before You Install the Switch Before you install the switch or relay for screen blanking, you need to supply power to the vehicle mount computer. For more information, see the CV41 Vehicle Mounting Kit Reference Guide. 86 CV41 Vehicle Mount Computer (Windows CE) User Guide