Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 86
Enable WPA or WPA2 Personal PSK Security With Microsoft
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 4 - Configure the Computer f Tap OK to save the Microsoft Security settings. 8 If you choose PEAP: a Load a root certificate of the authentication server on your computer. For help, see "Load a Certificate" on page 75. b Tap OK to save the security settings and the User Logon dialog box appears. c Tap a User Name, Password, and Domain. Select Save Password if you want to save the password for future authentication sessions. d Tap OK to save the Microsoft Security settings. Enable WPA or WPA2 Personal (PSK) Security With Microsoft Use the following procedure to enable WPA-PSK With Microsoft Security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Start Intermec Settings. 3 Choose Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, choose Infrastructure. 5 For Network Authentication, choose WPA-PSK. Data Encryption automatically defaults to TKIP for WPA and AES for WPA2. 6 For Pre-Shared Key, enter the pre-shared key or the passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the authenticator. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the computer internally converts it to a pre-shared key. 7 Save your settings. 72 CV41 Vehicle Mount Computer (Windows CE) User Guide