Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 20
About the Smart Dock, Attach the CV41 to the Smart Dock
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 - About the Computer About the Smart Dock The smart dock is secured to a forklift using a RAM mounting kit and provides conditioned power to the CV41. The CV41 can then be connected or removed from the smart dock at any time. With this unique system, you can easily move the CV41 from one vehicle equipped with the smart dock to another. Additionally, the dock provides: • a USB port • two COM ports • a CANBUS/audio port • strain relief cable mounts To connect any accessory such as a tethered scanner, an audio headset, or a USB flash drive, you need to purchase the correct accessory cables. For more information, contact your local Intermec representative. Make sure the smart dock is powered off before you connect any cables to it. Attach the CV41 to the Smart Dock Once you have secured the smart dock and connected it to power, attach the CV41 to the smart dock. 1 Press and hold the Power button on the CV41 until the computer turns off. 2 Locate the protruding lip on the rear of the CV41. 3 Place the lip of the CV41 over the top of the dock. 4 Slide the CV41 from side-to-side until the CV41 is seated into the smart dock. 5 Push down onto the smart dock until you hear a click. 6 If necessary, adjust the viewing angle by adjusting the pivot arm on the RAM mount. 6 CV41 Vehicle Mount Computer (Windows CE) User Guide