Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 81
Con WPA or WPA2 Personal PSK Security With Funk
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 4 - Configure the Computer 5 Select the profile you want to configure. 6 For Association, choose WPA or WPA2. Encryption automatically defaults to TKIP or AES, respectively. 7 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS. 8 If you choose TTLS, EAP-FAST, or PEAP: a For Prompt for Credentials, choose Enter credentials now. b Enter a User Name and User Password. c For Validate Server Certificate, choose Yes. Note: The correct date must be set on your computer when you enable Validate Server Certificate. 9 If you choose TLS: a Load a user and root certificate on your computer. For help, see "Load a Certificate" on page 75. b Enter a User Name and Subject Name. c For Validate Server Certificate, choose Yes. Configure WPA or WPA2 Personal (PSK) Security With Funk Use the following procedure to configure WPA-PSK or WPA2-PSK with Funk security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For Association, choose WPA or WPA2. 7 For 8021x, choose None. 8 For Pre-Shared Key, enter the pre-shared key or passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on CV41 Vehicle Mount Computer (Windows CE) User Guide 67