Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 83
Con LEAP Security With Funk, Con Static WEP Security With Funk Security
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 4 - Configure the Computer Configure LEAP Security With Funk After you configure the communications and radio parameters on your computer and select Funk as your security choice, you can configure LEAP. 1 Start Intermec Settings. 2 Choose Communications > 802.11 Radio > Funk. 3 Select the profile you want to configure. 4 For 8021x, choose LEAP. 5 For Association, choose Open, WPA, WPA2, or Network EAP. Encryption automatically defaults to TKIP if you choose WPA, AES if you choose WPA2, and WEP if you choose Open or Network EAP. 6 For Prompt for Credentials, choose Enter credentials now. 7 Enter a User Name and User Password. 8 Save your settings. Configure Static WEP Security With Funk Security Use the following procedure to configure static WEP security with Funk. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For 8021x choose None. 7 For Association, choose Open. 8 For Encryption, choose WEP. CV41 Vehicle Mount Computer (Windows CE) User Guide 69