Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 84

Select Microsoft as Your Security Choice, Use Open No Security Associations with Funk

Get Intermec CV41 PDF manuals and user guides View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

Chapter 4 - Configure the Computer 9 Define a value for the keys you want to use. You can define up to four keys (Key 1 through Key 4). Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex pairs. 10 For Transmit key, choose the key you want to use for transmitting data. 11 Save your settings. Use Open (No Security) Associations with Funk Use the following procedure to configure your computer for open security using Funk. 1 Start Intermec Settings. 2 Choose Communications > 802.11 Radio > Funk Security. 3 Select the active profile you are using. 4 For Association, choose Open. 5 For Encryption, choose None. 6 Tap OK. Your settings are saved. Select Microsoft as Your Security Choice The default security setting is Funk. If you want to use Microsoft Wireless Zero Configuration (WZC) security, you need to select it as your security choice. After you select Microsoft as your security choice, you will be prompted to save your settings and reset the computer for your change to take effect. With Microsoft as your security choice, you can configure: • WPA or WPA2 • 802.1x • Static WEP 70 CV41 Vehicle Mount Computer (Windows CE) User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Chapter 4 — Configure the Computer
70
CV41 Vehicle Mount Computer (Windows CE) User Guide
9
Define a value for the keys you want to use. You can define up to
four keys (
Key 1
through
Key 4
).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5-byte value for
64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be
preceded by 0x and contain 5 or 13 hex pairs.
10
For
Transmit key
, choose the key you want to use for transmitting
data.
11
Save your settings.
Use Open (No Security) Associations with Funk
Use the following procedure to configure your computer for open
security using Funk.
1
Start Intermec Settings.
2
Choose
Communications >
802.11 Radio > Funk Security
.
3
Select the active profile you are using.
4
For
Association
, choose
Open
.
5
For
Encryption
, choose
None
.
6
Tap
OK
. Your settings are saved.
Select Microsoft as Your Security Choice
The default security setting is Funk. If you want to use Microsoft
Wireless Zero Configuration (WZC) security, you need to select it as
your security choice. After you select Microsoft as your security choice,
you will be prompted to save your settings and reset the computer for
your change to take effect.
With Microsoft as your security choice, you can configure:
•
WPA or WPA2
•
802.1x
•
Static WEP