Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 82
Con x Security With Funk Security, Prompt for Credentials
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 4 - Configure the Computer the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the computer internally converts it to a pre-shared key. This value must match the passphrase on the authenticator. 9 Save your settings. Configure 802.1x Security With Funk Security Use the following procedure to configure 802.1x-WEP security with Funk security. Intermec recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For Association, choose Open. 7 For Encryption, choose WEP. 8 For 8021x, choose TTLS, PEAP, or TLS. 9 If you chose TTLS or PEAP: a Enter a User Name. b For Prompt for Credentials, choose Enter credentials now. c Enter a User Password. d For Validate Server Certificate, choose Yes. 10 If you choose TLS: a Load a user and root certificate on your computer. For help, see "Load a Certificate" on page 75. b For Validate Server Certificate, choose Yes. c Enter a User Name and Subject Name. 11 Save your settings. 68 CV41 Vehicle Mount Computer (Windows CE) User Guide