Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 85
Select Microsoft Security, Con WPA or WPA2 Enterprise 802.1x Security With, Microsoft
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 4 - Configure the Computer Select Microsoft Security Use the following procedure to select Microsoft security. 1 Start Intermec Settings. For help, see "Start Intermec Settings" on page 47. 2 Choose Communications > 802.11 Radio > Security Choice. 3 From the Security Choice list, select Microsoft Security. An alert box appears telling you that you must save your settings and reboot the computer for the new security choice to take effect. 4 Tap Yes. The computer resets and starts with Microsoft Security as the Security Choice. Configure WPA or WPA2 Enterprise (802.1x) Security With Microsoft Use these procedures to set WPA-802.1x security on your computer with Microsoft security. 1 Make sure the communications and radio parameters on your computer are configured. 2 Start Intermec Settings. 3 Choose Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, choose Infrastructure. 5 For Network Authentication, choose WPA or WPA2. Data Encryption automatically defaults to TKIP for WPA and AES for WPA2. 6 For 802.1x Authentication, choose either TLS or PEAP. 7 If you choose TLS: a Load a user and root certificate on your computer. For help, see "Load a Certificate" on page 75. b Choose Properties. The Certificates dialog box appears. c Select the certificate you want to use from the list. The User Logon dialog box appears. d Enter a User Name and Domain and tap OK. e Tap OK to exit the Certificates dialog box. CV41 Vehicle Mount Computer (Windows CE) User Guide 71