Intermec CV41 CV41 Vehicle Mount Computer (Windows CE) User Guide - Page 74
Connect to a USB Scanner, Connect to a Serially Tethered Scanner
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 4 - Configure the Computer Connect to a USB Scanner When an HID-enabled USB scanner is used with the CV41, any data handling must be programmed into the scanner because the data transmits to an active window as a keystroke message, and bypasses the Intermec Data Collection wedge. You can program the scanner by: • scanning the configuration bar codes from the scanner manufacturer. • installing an application that accepts the incoming data. For the SR30 or SR61T, you must purchase the correct scanner USB cable to use with the CV41. For more information, see the following table. Required USB Cables For the SR30 or SR61T Scanner Model SR30 SR61T (Gen 1) SR61T (Gen 2) Required Cable 6.5 ft (1.9 m) cable (P/N 236-159-002) 6.5 ft (1.9 m) cable (P/N 236-182-001) 6.5 ft (1.9 m) cable (P/N 236-240-001) Connect to a Serially Tethered Scanner Use this procedure to connect your computer to connect a tethered scanner and enable RS-232 communications. For the SR30 or SR61T, you must purchase the correct serial cable to use with the CV41. For more information, see the following table. Required Serial Cables For the SR30 or SR61T Scanner Model SR30 SR61T (Gen1, Gen 2) Required Cable 6.5 ft (1.9 m) cable (P/N 236-164-002) • 6.5 ft (1.9 m) cable (P/N 236-197-001) • 12 ft (3.6 m) cable (P/N 237-197-001) 1 Connect the scanner to the COM1 or COM2 port. 60 CV41 Vehicle Mount Computer (Windows CE) User Guide