Intermec IF2 IF2 Network Reader User Manual - Page 104
Use the Power Interface
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Chapter 6 - Use the IF2 GPIO Interfaces + 12 V + Output AC motor - Output Ground External relay 120-230 VAC Driving a DC Relay: The external relay provides dry contacts for controlling the AC motor. Note: In many installations, the relay and AC wiring must be placed in an enclosure that meets local fire code regulations. Use the Power Interface The IF2 GPIO interface provides 12 VDC at 0.5 A for powering external inputs and loads, eliminating the need for an external DC supply and simplifying the system installation. The GPIO interface power has an internal thermal fuse that trips if the load exceeds 0.5 A. The fuse is self-recovering once the excessive load is removed. The total load on the GPIO interface power must stay within the 0.5 A limit. When you design a system that uses the GPIO interface power, be sure to complete a power budget assessment to ensure that the supply is adequate for the system. If your system needs more than +12 VDC at 0.5 A, you can connect an external power supply to the +12 V and Ground pins. The external supply powers the external loads, and that power will be available at all +12 V pins on the GPIO port. 90 IF2 Network Reader User Manual