Intermec IF2 IF2 Network Reader User Manual - Page 89
Connect Directly to the RFID Module, To connect directly to the IF2 RFID module and verify operation
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 5 - Manage, Troubleshoot, and Upgrade the IF2 Connect Directly to the RFID Module If your application does not appear to be communicating with the IF2 RFID module, you can use a communications program to verify that the RFID module is working properly. You need to know the IF2 IP address to connect directly to the RFID module. To verify that the RFID reader is reading tags, you need a known good RFID antenna and at least one good RFID tag. To connect directly to the IF2 RFID module and verify operation 1 Make sure the RFID antenna is connected properly to the IF2. 2 Apply power to the IF2. 3 Use a communications program (such as HyperTerminal) to open a TCP/IP connection to the IF2 with these parameters: Parameter IP Address Port Value IP address of the IF2 2189 Configure the communications program to echo typed characters locally and to send line feeds with line ends. 4 Press Enter. The BRI prompt (OK>) appears. If the prompt does not appear, there may be a problem with the RFID module or your connection to the module. IF2 Network Reader User Manual 75