Intermec IF2 IF2 Network Reader User Manual - Page 45
Change the Default Login, Security, Passwords, Enable RADIUS, Activate Changes
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 2 - Configure Network Settings Note: USB is not supported on the IF2 with Expanded Memory Option. Change the Default Login If you are not using a password server to authorize user logins, Intermec recommends that you change the default user name and password and create a read-only password. To set up logins 1 From the main menu, click Security > Passwords. The Passwords screen appears. 2 Make sure the Enable RADIUS check box is not checked. Clear this check box if necessary and then click Activate Changes. 3 Configure the parameters. For help, see the next table. 4 Click Activate Changes to save your changes and immediately make them active. Password Parameter Descriptions Parameter Username Description Enter the user name you need to use to log in to this IF2. The user name can be from 1 to 32 characters long. You must always specify a user name. Default is intermec. IF2 Network Reader User Manual 31